Vitek VT-TPTZ10HR-2T, Manual

Page: 4 / 28

Transcendent Series 2.1 MegaPixel 10x HD-TVI PTZ Camera
4
1 PRODUCT INTRODUCTION
1.1 PACKAGE CONTENTS
IP IR Speed dome 1pc
Wall mount bracket 1pc
Power supply 1pc
Screws kits 1pc
User manual 1pc
1.2 FUNCTION DESCRIPTION
Multilanguage OSD Menu
The language displayed on screen menu, the available languages are English, Spanish, French,
Portuguese, Polish, Deutsch and Italian. User can set the function or parameter, or check the
related information through the OSD.
IR Detection Time
Time duration for switching from Color to B/W or B/W to Color. It can be set through OSD
Focus
Focus
Auto focus enables the camera to focus automatically to maintain a clear image. User can switch
to manual focus if need be.
Under the following conditions the camera will not auto focus on the target:
(1) Target is not in the center of the screen;
(2) Attempting to view images that are far and near at the same time;
(3) Target is a very bright object, such as neon lamp, etc.;.
(4) Target is behind glass covered with water droplets or dust;
(5) Target is moving quickly;
(6) Low contrast large area targets, such as a wall;
(7) Targets are too dark or faint.
BLC (Back Light Compensation)
If a bright back-light is present, the target in the picture may appear dark or as a silhouette, BLC
enhance the target in the center of the picture, the dome uses the center of the pictures to adjust
the iris. if there is a bright light source outside this area, it will wash out to white, the camera will
adjust the iris so that the target in the sensitive area will be properly exposed.
Iris Control
Factory default is automatic camera aperture, in this mode the camera senses changes in ambient
light through the lens and automatically adjusts the lens aperture to make the brightness of image
stable. Users can through pressing OPEN or CLOSE iris adjusting keys, manually adjust the
aperture size to get the required picture brightness. By controlling the keyboard up, down, left, right
or zoom to resume auto iris (auto iris is recommended).
Auto-recognize Protocol and Module
The dome can auto-recognize the corresponding protocol and module during self-inspection.
Day/Night Switch
With auto day/night switch function, when the illumination is low the picture will auto switch from
day to night mode and when the illumination is high enough the picture will auto switch from night
to day mode