Vitek VT-TPTZ10HR-2T, Manual

Page: 16 / 28

Transcendent Series 2.1 MegaPixel 10x HD-TVI PTZ Camera
16
4.3.1 Communication
Fig4.3.1.1 Fig.4.3.1.2
DEVICE ID : It is auto generated by system.
CHECK ID : To change the TARGET ID, please input the CHECK ID exactly same as the DEVICE
ID displays on the screen.
TARGET ID : Target ID is available from 001 to 250 and used to distinguish several domes of same
ID.
SOFT PROTOCOL : Soft protocol is auto, Pelco-D and Pelco-P available
BAUD RATE
: 1200BPS, 2400BPS, 4800BPS, 9600BPS available
<COMM RESET> : As shown in fig 4.3.1.2, choose “ YES” ,the dome will save the setting
automatically and restart
SAVE : After saving, the dome will reboot. Communication settings take effect.
4.3.2 IR Display
WORKING MODE : Working mode has auto, black/white, color selectable. Default is auto.
TESTING TIME
: On IR auto working mode and the programmed time, the IR will execute
programmed action accordingly, e.g. Switch from day to night or from night to day. The detection
time is from 2s to 15s selectable.
OUTPUT POWER : Output power has 40%,60%,80%,100% for selection!
ILLUMINATION ON : Illumination on is 1 to15 grade selectable and default is 3. On the auto IR
<COMM>
DEVICE ID 125295
CHECK ID 125288
TARGET ID 000
SOFT PROTOCOL
AUTO
BAUD RATE 2400
<COMM RESET>
SAVE
EXIT
<COMM RESET>
RESET TO DIAL THE CODE
OK
<IR DISPLAY>
WORKING MODE
AUTO
TESTING TIME
08S
OUTPUT POWER 100%
ILLUMINATION ON 03
AMBIENT LIGHT 09
IR SWITCH ZOOM 06
EXIT