VITEK 5-in-1 CCTV TESTING MONITOR
VITEK 5-in-1 CCTV TESTING MONITOR
Page 37
Coaxial camera menu settings
Tap icon “UTC”, select “menu setting” to enter the dome camera menu
Input calling dome camera menu address code, after finishing the parameter settings, you can press the
key
“
Enter
”
or click the icon
to call the dome camera menu
For more operation instructions (such as PTZ control, coaxial camera menu setting, snapshot, recording
and playback etc.), please refer to “3.3.10 CVI camera test”
Page 38
3.3.9AHD camera test
For AHD camera, AHD dome camera test and PTZ control, click icon to enter
When AHD signal input is in, the tester will display the image resolution on the top bar. Double tap on
the screen to make the image displayed full screen. The tester supports the following resolution:
1280x720P 25FPS / 1280x720P 30FPS / 1920x1080P 25FPS / 1920x1080P 30FPS/2048x1536P
18FPS/2048x1536P 25FPS/2048x1536P 30FPS /2560x1440P 15 FPS/2560x1440P 25 FPS/
2560x1440P 30 FPS/2592x1944P 12.5FPS/2592x1944P 20FPS, 3840x2160P 15FPS.
(1) Coaxial PTZ control
UTC control: select “PTZ control or PTZ control-2” (AHD camera has two
different orders. If you select “PTZ” and you cannot control , please go to “PTZ-2” )
To control AHD PTZ via Coax, no parameters setting is needed. For more operation instructions please
