VITEK 5-in-1 CCTV TESTING MONITOR
VITEK 5-in-1 CCTV TESTING MONITOR
Page 7
Note:
If the IP camera requires PoE power, then connect the IP camera to the IP tester’s LAN port. The
tester will supply PoE Power for the IP camera. Click on the icon labeled PoE to turn on/off PoE Power.
3.2.2 Analog camera connection
(1) Connect the camera’s video output to the IP tester’s VIDEO IN. The image will display on the tester
after pushing the PTZ icon
(2) Connect the camera or the speed dome RS485 controller cable to the tester RS485 interface (Note
positive and negative connection of the cable).
3.2.3 HD Coaxial camera connection
* CVI, TVI, AHD camera are classified as HD coaxial cameras. The following are instructions on how
to connect the TVI camera to the tester also apply to CVI, and AHD cameras.
Page 8
(1) Connect the TVI camera’s video output to the IP tester’s “Video IN” interface. The image will
display on the tester. The tester only comes with an HD analog input interface. There is no output
interface.
(2) Connect the HD camera or the speed dome RS485 controller cable to the tester RS485 interface.
3.3 OSD menu
◼
Press the key
2 seconds to turn on
◼
Press the key
2 seconds to turn off
◼
S
hort press the key to enter sleep mode, press it again to wake the tester
3.3.1
Lite mode
◼
Lite mode: You can easily find corresponding apps
