1. Power
Depending on the type of installations, apply power to the camera by one of the two options below.
a) Via Ethernet – Use only with POE + switch (100 Meters max distance)
b) 12VDC - Use with 12VDC 2A ** SEE IMPORTANT NOTES BELOW **
Primary and secondary grounds are completely isolated to avoid possible ground-loop problems.
2. Ethernet Connection
Insert one end of the Ethernet cable into the network jack of your camera, and insert the other end
into the data port (switch, router, etc)
4.3.
Removable Storage
For recording directly on the camera you will need to install a MicroSD card, this will allow you to
play video directly from the camera.
(Please use only class 10 SD cards)
.
a) Insert the MicroSD memory card as shown below (the MicroSD card will need to be formatted
.
(refer to
Section
Error! Reference source not found.
Error! Reference source not found.
on
page
Error! Bookmark not defined. for instructions on Formatting)
4.4.
Attaching PTZ Camera to Base
a) Place the camera on to the Guide and push upwards, you will hear a click from the camera
snapping in to the base.
4
5
