Vitek VT-PTZ220HD, Manual

Page: 32 / 69

HD-SDI CAMERA
30
7. Set the swap option.
8. Set the dwell time.
9. Execute Save and Exit.
To run a stored scan directly from the dome menu, go to Run Function in the
main DOME MENU.
10.1.5 Tour
Tours can be called directly, assigned to actions or applied as “home” position.
8 programmable tours are available Each tour can consist of up to 42
functions (preset, pattern, scan or other tour). Using second-level tours, it can be
expanded up to 336 functions in a single tour. However, tours in the second-level
tour will be ignored when called by the first-level tour. This can be best illustrated
by the following example:
I f Tour 01: Preset 02, Preset 03, Tour 02, Tour 03
Tour 02: Preset 05, Preset 06, Tour 04, Preset 05
Tour 03: Preset 07, Pattern 01
Tour 04: Preset 08, Preset 05, Pattern 01
Tour 01 executes as follows:
Preset 02 -> Preset 03 -> Preset 05 -> Preset 06 -> Preset 05 -> Preset 07 ->
Pattern 01 ... (Tour 04 in Tour 02 will be skipped in Tour 01)
Tour 02 executes as follows:
Preset 05 -> Preset 06 -> Preset 08 -> Preset 05 -> Pattern 01 ->
Preset 05 …(Tour 04 is still valid if called directly from Tour 02)