Vitek VT-PTZ220HD, Manual

Page: 30 / 69

HD-SDI CAMERA
28
number.
2. Move the cursor position with Joystick (up/down)
3. Select the column number(01)
4. Control the Joystick(tele/wide) to Open the PATTERN AREA SETUP menu
The recording starts.
1. Scan the relevant area.
2. Press the IRIS-OPEN button to save the recording.
The PATTERN SETUP is displayed again.
3. Select the column TITLE and then control the joystick(tele/wide)
4. Edit the title of the pattern (see section 10.1.2.1 Edit Title).
If the total recording time reaches 480 seconds, the recording is stopped
automatically.
When you start to record again, the previous data will be overwritten.
5. Execute Save and Exit.
To run a stored pattern directly from the dome menu, go to Run Function in the
PATTERN SETUP
NO TITLE SEC
01 PATTERN1 045
02 PATTERN2 000
03 PATTERN3 000
04 PATTERN4 000
05 PATTERN5 000
06 PATTERN6 000
07 PATTERN7 000
08 PATTERN8 000
TOTAL
Save and Exit
PATTERN AREA SETUP
CONTROL
1 :000 SEC
Total :000 SEC
Press IRIS-OPEN to save
320.0 000.9 1.3X