background image

VITEK

VT-PTZ220HD

On Cue 2.0 MegaPixel HD-SDI 

20x IP PTZ Camera

• 1/2.8” 2.0 Megapixel Sony® Exmor™ Progressive Scan CMOS Sensor

• Built-in X20 times Optical Power Zoom Camera. (4.7mm to 94mm)

• True Night Shot function with Exmor ICR Day/Night Function.

• 248 Programable Presets

• 8 Patterns record and play back user preference of surveillance path up to 480° sec.

• 16 Scans: 8 speed steps with smooth vector scan.

• 8 Tours: Each tour consists up to 42 Presets, Patterns, and Scans

• 8 Alarm inputs with 0~8 Priority / 2 Auxiliary outputs programmable NC & NO.

• 8 Privacy Zones: 4 Polygon / Video off or 4 masked Block /Video off / Mosaic

• 64 steps of variable speed from 0.1°/sec to 105°/sec.

• Max manual speed 420°/sec with Turbo key pressed, Preset speed is 420°/sec.

• Programmable user preferences of speed (Changeable 60°/sec to 105°/sec).

• Addressable up to 999 camera IDs (Extendable up to 399 in special mode).

• Built-in RS-485 receiver driver.

• On-site software upgrade and upload/download of programmed data into the KBD.

• Built-in power-line surge protection and lighting protection.

Summary of Contents for VT-PTZ220HD






































































Reviews: