Vitek VT-PTZ10, User Manual

Page: 41 / 52

VT-PTZ10
40
3.5.10 SYSTEM INFORMATION (
MENU
=> SETUP => SYSTEM INFORMATION)
This screen shows information of the dome camera for service or trouble shooting
APPENDIX A
— SPECIFICATIONS
Lens
Camera
Image Sensor 1/4" Interline Transfer CCD(Sony)
Picture elements
NTSC : 768x494 Approx. 380K pixels
PAL : 752x582 Approx. 440K pixels
Horizontal Resolution 500 TV Lines
Lens
10x optical zoom with auto focus
10x digital zoom
F1.8 to F3.0, f=3.8mm to 38mm
View angle
Approx. 51.2

(WIDE end) to 5.58

(TELE end)
Minimum Illumination
0.7 lux(F1.8,normal shutter speed)
0.02 lux (F1.8, IR Cut Filter Removed)
0.005 lux (F1.8, DSS Auto with IR Cut Filter Removed)
S/N ratio more than 50dB
Controller specifications
General
Certification CE EMC, FCC CLASS A
Electrical
Input Voltage 18 to 30 VAC; 24 VAC nominal, built-in power-line surge
Power Requirement 24 VAC/VDC 700mA
Power Consumption Maximum 15W / 30W(Heater Use)
SYSTEM INFORMATION
CAMERA TYPE : XXXXXXX
H/W VERSION : V1.00
ROM VERSION : V1.00
PROTOCOL : EZ
BUADRATE : 9600BPS
EXIT MENU