Vitek VT-HDOC Series, Manual

Page: 58 / 96

VT-HDOC Series
57
Minimum Recommended
Operating System Windows XP Windows 7
CPU Core2Duo @2.53GHz or Equivalent Core i5 @3.3GHz or Higher
Memory 1 GB 2 GB
Video Card Memory 512MB 512MB
HDD Capacity 50MB 2GB
VGA Resolution 1280x1024x16 1920x1080x32
Direct-X DirectX 7.0 DirectX 9.0c
Network Ethernet 10/100B-TX
7.1.1 CONNECT TO WEB SERVER
Enter the IP address of HYBRID-DVR into the ULR bar referring to the below picture.
Enter the IP address of On Cue HYBRID-DVR into the ULR bar referring to the below picture.
LOCAL NETWORK ACCESS : To find the IP address of the DVR, go to the ‘INFO’ section under
the SYSTEM/MANAGEMENT of the DVR’s menu. If you are on the same network as the DVR,
you can use the DVR’s IP address to access it.
REMOTE NETWORK ACCESS : To access the DVR from a remote network, you need to use
the WAN IP address of the network the DVR is connected to. (Sometimes this address is
referred to as the LIVE, PUBLIC, or OUTSIDE IP). In order to view your DVR remotely you
MUST port forward BOTH the DVR PORT and the WEB SERVER PORT. To find the DVR and
Web Server ports, go to the NETWORK SETUP page.
If you need assistance with port forwarding, please visit our website and review our
tutorial videos: http://vitekcctv.com/videotutorials.asp . If you need further assistance,
please reference your router’s manual or contact your Network Administrator/IT
Professional. If your router supports the ‘uPNP’ feature, there is no need to manually
configure ‘Port Forwarding’ because the DVR supports the ‘Auto Port Forwarding’ function
using the ‘uPNP’ protocol.
[The initial screen of Web Server]