Vitek VT-HDOC Series, Manual

Page: 10 / 96

VT-HDOC Series
9
2 4
11 10
8
7
6
5
9
1 3
[Rear panel of 8ch Hybrid-DVR]
2
4
11
5
1 3
6 7 8
9 10
[Rear panel of 16ch Hybrid-DVR]
1.Power Switch(Only the 4CH HYBRID-DVR)
Switch to turn the DVR ON & OFF.
2.eSATA Connection Port(Option)
connect e-SATA storage to expand HDD
3.VGA Output (Video Graphic Array)
15-pin D-sub connector for the analogue VGA output.
4.Audio Inputs
RCA connectors for theaudio signal inputs. (Line In)
5.Power In
12V DC Power socket.
6.Alarm(Sensor) Inputs, RS-485, and Relay Output
•
Alarm inputs x 4
• RS-485 Signals. (G: Ground, D+: RX/TX + signal, D-:
RX/TX- signal)
• 4CH HYBRID-DVR: Relay output for the relay 1 (NO:
Normal Open, NC: Normal Closed, CM: Common)
• 8&16CH HYBRID-DVR: Relay output for the relay 2
(NO: Normal Open, NC: Normal Closed, CM:
Common)
7.RJ-45 Network Port( 1G Base-T)
Network port is used to 1G base-T, PC applicatio
n software or Mobile application.
8. CVBS Monitor Output
Composite video output for the spotlive screen. (B
NC)
9.Audio Outputs
RCA connectors for theaudio signal outputs. (Line out)
10.DIGITAL VIDEO OUT
Digital video output for the main monitor.
11. HD-SDI or Analog Camera Input
analog Camera input or HD-SDI video inputs for e
ach camera
2. GETTING STARTED
2.1 CONNECT AND SWITCH ON
Connect HD cameras to camera inputs on the back of the DVR.
Connect one or more monitors to the DVR using HDMI, VGA, CVBS.