6
ENGLISH
BEFORE THE FIRST USE
After unit transportation or storage at low tem-
perature keep it for at least three hours at room
temperature before switching on.
•
Unpack the unit and remove any stickers that can
prevent unit operation.
•
Unwind the power cord to its full length.
•
Check the unit for damages, do not use it in case
of damages.
•
Before plugging the unit in make sure that the
operating voltage of the unit corresponds to the
voltage of your mains.
HAIR STRAIGHTENING
•
The unit can be used for both long and short hair.
•
Use the unit only on healthy undyed and not
permed hair or use it along with special hair
straightening products.
•
If your hair has been dyed or permed, use the unit
rarely.
•
For the best results the hair should be clean and dry.
•
Put the unit on a flat steady and heat-resistant
surface.
•
Insert the power plug into the mains socket.
•
Switch the unit on by setting the power switch/
heating temperature selection to the correspond-
ing position, one indicator (2) (low heating degree)
or two indicators (2) (high heating degree) will
light up.
Note:
–
During the first operation some smell from the
heating element is possible, this is normal.
•
Divide combed hair into locks of equal width (about
5 cm).
•
Place the brush teeth (5) close to the hair lock
roots and slide the brush to the hair tips.
•
Straighten all hair locks.
•
Cool your hair down before final styling or apply-
ing hair spray.
•
Avoid contact of heated surfaces with your face,
neck and other parts of your body.
IM VT-8447_70x130.indd 6
18.09.2017 16:10:27
