5
ENGLISH
• Do not attempt to repair the unit. Do not disassemble the
unit by yourself, if any malfunction is detected or after it
was dropped, unplug the unit and apply to any authorized
service center at the contact addresses given in the war-
ranty certificate and on the website www.vitek.ru.
• To avoid damages, transport the unit in the original pack-
age only.
• Keep the unit in a dry cool place away from children and
disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY, ITS
COMMERCIAL USAGE AND USAGE IN PRODUCTION AREAS
AND WORK SPACES IS PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage under cold (winter)
conditions, it is necessary to keep it for at least three
hours at room temperature before switching on.
– Unpack the unit and remove any packaging materials and
advertising stickers that prevent the unit operation.
– Check the unit for damages; in case of damages do not
use the unit.
– Before switching the unit on, make sure that your home
mains voltage corresponds to the unit operating voltage.
USAGE
To get the best results, wash your hair with shampoo, wipe it
with a dry towel, dry with a hairdryer and comb your hair. After
that you can start styling your hair.
– Divide the hair into locks 4-5 cm wide.
– Put the unit on the safety stand (3) on a flat heat-resistant
surface.
– Insert the plug into the mains socket.
– Switch the unit on by shifting the power switch (6)
upwards, the light indicator (5) will light up.
– Wait for some time required for the operation surface
(2) heating.
– Take a hair lock with the free hand.
– Press the clamp handle (4), place the end of the lock on
the operating surface (2) and move the clamp (4) down.
Holding onto the protecting tip (1) and handle (7), wind the
lock around the operating surface (2).
– Wait for a while, then press the clamp handle (4) and
release the hair lock.
– Repeat this procedure on the rest of your hair.
IM VT-8409.indd 5
4/28/18 2:36 PM
