6
ENGLISH
– The unit is intended for operation from an AC power
network with the frequency of 50 or 60 Hz. The unit
does not need any additional settings for operating
with the required rated frequency.
USAGE
To get the best results, wash your hair with shampoo,
wipe it with a dry towel, dry with a hairdryer and comb
your hair. After that you can start styling your hair.
– Divide the hair into locks 4-5 cm wide.
– Put the unit on the safety stand (3) on a flat heat-
resistant surface.
– Insert the plug into the mains socket.
– Switch the unit on by setting the power switch (6) to
the position «ON», the light indicator (5) will light up.
– Wait for some time required for the operation sur-
face (2) heating.
– Take a hair lock with the free hand.
– Press the clamp handle (4), place the end of the
lock on the operating surface (2) and move the
clamp (4) down. Holding onto the protecting tip (1)
and handle (7), wind the lock around the operating
surface (2).
– Wait for a while, then press the clamp handle (4) and
release the hair lock.
– Repeat this procedure on the rest of your hair.
Notes:
– when using the unit for the first time, a foreign smell
can appear. It is normal.
– do not touch the operating surface (2) during the
unit operation, hold the unit by the protecting tip (1)
with one hand and by the handle with the other (7).
– during breaks in operation, place the unit on the
safety stand (3) on a flat heat-resistant surface.
– do not comb the hair right after curling it, let it cool
down, divide big locks into smaller ones carefully to
make the hairstyle look natural.
– After the unit operation, switch the unit off by set-
ting the power switch (6) to the “OFF” position and
unplug it.
IM VT-8293_70x130.indd 6
08.02.2019 17:01:21
