5
ENGLISH
•
After shaving switch the shaver off by setting the switch
(4) to the «0» position, cover the shaving block (1) with the
protection cap (9) and take the shaver away for storage.
•
It is recommended to clean the shaving block (1) after
every use.
•
Press the release button (2), clean the shaving block
both from the inside and outside with the brush (10),
clean the blades drive (pic. 2, 3).
Using of trimmer (pic. 4)
The trimmer is intended for trimming sideburns and mus-
tache.
•
Move the trimmer lock (7) downwards.
•
Switch the shaver on, setting the switch (4) to the «I»
position.
•
Place the trimmer under the right angle to your skin
and move it gradually downwards to trim mustache or
sideburns.
•
Switch the shaver off by setting the switch (4) to the «0»
position and close the trimmer by pressing it.
CLEANING AND CARE
Clean the shaving block (1) after every using or after several
operation cycles of the shaver.
•
For easy cleaning of the shaving block (1) remove it from
the shaver body (3) by opening it and pulling it upwards
(pic. 2, 5).
•
Using the brush (10) clean the shaving block (1) both
from the inside and outside, clean the blades drive
(pic. 3, 6).
•
Install the shaving block (1) to its place, cover it with the
protection cap (9) and take the shaver away for storage.
•
It is recommended to clean the shaving heads every two
months (pic. 7, 8).
•
Switch the shaver off by setting the switch (4) to the
«0» position.
•
Press the release button (2) and remove the shaving
block (1).
•
Turn the frame clamp counterclockwise and remove
the frame.
•
Remove every stationary net together with the rotat-
ing blade.
Note:
Be careful when removing the stationary nets; install
the rotating blades to the same stationary nets after clean-
ing, otherwise fitting of rotating blades to the nets will take
some time and this may affect the quality of shaving.
•
Clean the rotating blades and the stationary nets with
the brush (10).
IM VT-8268_70x130.indd 5
13.12.2017 18:07:36
