Vitek VT-8227, Manual Instruction

Page: 3 / 36

3
ENGLISH
HAIR DRYER VT-8227
The hair dryer is intended for hair drying and styling.
DESCRIPTION
1.
Operation mode switch ( 0\1\2 )
2.
«Cool shot» button
3.
Nozzle
4.
Air inlet grid
5.
Hairdryer handle
6.
Hanging loop
ATTENTION!
–
Do not use the unit near water in bathrooms, show-
ers, swimming pools etc.
– After using the hair dryer in a bathroom, discon-
nect the power plug from the mains socket, as
water closeness is dangerous even if the unit is
switched off.
– For additional protection you can install a residual
current device (RCD) with nominal operation cur-
rent not exceeding 30 mA into the bathroom mains;
contact a specialist for installation.
SAFETY MEASURES
Before using the electrical unit, read this instruction
manual carefully and keep it for future reference.
Use the unit for its intended purpose only, as specified
in this manual. Mishandling of the unit may lead to its
breakage and cause harm to the user or damage to
his/her property.
•
Before switching the unit on, make sure that the
mains voltage corresponds to the unit operating
voltage.
• Never leave the operating unit unattended.
• Do not switch the unit on in places where aerosols
are sprayed or highly flammable liquids are used.
•
Hair spray should be applied only after hair straight-
ening is finished.
•
Always unplug the unit immediately after usage and
before cleaning.
•
When unplugging the unit, pull the plug but not cord.
IM VT-8227_70x130.indd 3 06.03.2019 17:09:26