Vitek VT-8227, Manual Instruction

Page: 6 / 36

6
ENGLISH
–
Select the required operation mode using the
switch (1):
« 0 » – the hairdryer is switched off;
«1» – low air flow speed;
«2» – maximal air flow speed.
Note: During the first operation some foreign smell and
a small amount of smoke from the heating element is
possible, it is normal.
Nozzle
Use the nozzle (3) when you need to focus the power
of drying on a small area (for example, a curl or a wave)
or when you want to straighten wavy hair.
–
Attach the nozzle (3) to the unit body. The nozzle (3)
allows directing a narrow air flow of high intensity at
a definite hair lock.
–
Insert the power plug into the mains socket. Use
the switch (1) to set the necessary operation mode.
“Cool air” supply
This model has a cool shot button for fixing your hair.
Press and hold down the cool shot button (2) «
» – it
enables to keep the created style.
–
After unit operation, switch the hairdryer off by set-
ting the switch (1) to the position «
0 », and unplug it.
Overheating protection
Overheating protection switches the hairdryer off if the
outgoing air flow is too hot. If the hairdryer switches
off during operation, set the operation mode switch
(1) to the “
0 ” position, unplug the hair dryer and make
sure that the inlets and outlets are unblocked. Let the
hairdryer cool down for 5-10 minutes and switch it on
again. Do not block the air inlets during unit operation
and avoid getting of hair into its air inlet.
CLEANING AND CARE
– The hair dryer is intended for household use only.
– Set the switch (1) to the position « 0 » and disconnect
the hair dryer from the mains.
IM VT-8227_70x130.indd 6 06.03.2019 17:09:26