Vitek VT-3525 W, Instruction Manual

Page: 7 / 44

ENGLISH
7
ton again. Indicator of the corre-
sponding alarm will go out.
Alarm snooze
– You can switch the alarm signal
off for 9 minutes by pressing the
button (9) “SNOOZE/SLEEP”.
The
indicator of the selected alarm will
flash; alarm signal will be repeated
in 9 minutes.
– To switch the alarm sound signal
off press the button (1) « ».
Note:
•
Projector switches on with the
alarm sound signal. To switch the
projector off press the «ON/OFF»
button (18).
•
The alarm/radio signal will
sound for 30 minutes if you do
not press any buttons.
Display brightness setup
Set up the necessary display bright-
ness by pressing the button (9) “DIM-
MER” repeatedly in the current time
mode.
Sequential displaying mode
You can switch the function of sequen-
tial displaying of current time, year,
date and temperature.
– To activate this function in the time
mode (radio is off) press and hold
the «DISPLAY» button (15) until the
symbol «ON» appears on the dis-
play.
– To switch the sequential display-
ing mode off press and hold the
«DISPLAY» button (15) until the
symbol «OFF» appears on the dis-
play.
Display auto switch off
– To activate the function press
and hold the «M+/NAP» but-
ton (11) until the indicator (27) «
» appears. The display will be
switched off 15 seconds after
pressing the buttons.
Note : This function is inactive in the
radio mode.
– To switch the function off press
and hold the «M+/NAP» button
(11) again until the indicator (27) «
» goes out.
Countdown timer
– Press the «M+/NAP» button (11) in
the current time mode, the symbol
«n90» will appear on the display
that means countdown timer actu-
ation in 90 minutes.
– Set the time of timer actuation
from 10 to 90 minutes with 10 min-
utes step by pressing the «M+/
NAP» button (11) repeatedly.
– To view the remaining time press
the «M+/NAP» button (11) once.
– After the set time runs off you will
hear a sound signal, to switch it off
press the button (1) « ».
– To cancel this function press the
«M+/NAP» button (11) repeated-
ly until «OFF» symbol appears on
the display or switch the radio on
pressing the button (1) « ».
Temperature view
To view the built-in thermometer read-
ings press the button (7).
To change temperature measurement
units (C/F) in temperature view mode
press the button (2) « » once.
VT-3525_105 x148.indd 7 05.02.2013 11:35:00