8
ENGLISH
clipper strongly, there is danger of injuries
or cuts when open blades come in contact
with the skin.
Cone-shaped haircut
Install the universal attachment (6 or 7)
and select the required cutting length.
Start cutting from the head back towards
the crown.
Cut the hair against the direction of the
growth, towards the crown, and from the
sides (pic. 10). To get a flat top haircut, use
the comb (11): lift the locks and cut them
along the comb (11). Comb the hair with a
comb (11) to reveal uneven locks.
CLEANING AND MAINTENANCE
–
Switch the hair clipper off after the use.
–
Clean the hair clipper body with a soft,
slightly damp cloth, and then wipe it
dry.
–
Never immerse the hair clipper, the
blade block or the power adapter into
water or other liquids.
–
Remove the universal attachment
(6 or 7). Use the brush (10) to clean both
surfaces (inside and outside) of the
attachment from the cut-off hair.
–
You can wash the attachment under a
water jet, then wipe it dry.
–
Remove the blade block (5) by press-
ing on the upper part of the block
on the blades side. Clean the blade
block (5) and the inner cavity under
the blade block (5) with the brush (10).
Install the blade block (5) back to its
place by inserting the bottom part
of the block into the groove on the
unit body and pressing the upper part
of the block (5). A click of the locks
shows that the blade block (5) is set
properly.
–
Do not use solvents or abrasives for
cleaning the unit set.
–
Lubricate the blades with oil (9) after
every use.
STORAGE
–
Clean the unit and lubricate the blades
with lubricating oil (9) before taking it
away for storage.
–
Keep the unit in a dry cool place away
from children and disabled persons.
DELIVERY SET
Hair clipper with the blade block – 1 pc.
Universal attachment – 2 pcs.
Power adapter – 1 pc.
Lubricating oil – 1 pc.
Cleaning brush – 1 pc.
Comb – 1 pc.
Scissors – 1 pc.
Manual – 1 pc.
TECHNICAL SPECIFICATIONS
Hair clipper
Built-in rechargeable battery:
2 х 1.2 V 600 mAh NiMh
Power: 2.4 W
Power adapter
Power supply: 220-240 V ~ 50/60 Hz, 50 mA
Output voltage: 3.6 V
1000 mA
ATTENTION!
Do not use the unit near water
in the bathrooms, showers, swimming pools
etc.
RECYCLING
For environment protection do not throw
out the unit and the batteries (if included),
do not discard the unit and the batteries
with usual household waste after the ser-
vice life expiration; apply to specialized
centers for further recycling.
IM VT-2584.indd 8
12.03.2019 17:37:22