6
ENGLISH
•
The unit is intended for operation with AC system and
50 or 60 Hz frequency. The unit does not need any
additional settings for operating with the required
nominal frequency.
FINGER WAVES STYLING
•
The unit can be used for both long and short hair.
•
Only use the unit on healthy, undyed, and not permed
hair.
•
If your hair has been dyed or permed, use the unit
rarely.
•
For the best results the hair should be clean and dry.
•
Open the curling tongs by moving the clamp (2).
•
Put the unit on a flat steady and heat-resistant surface.
•
Open the hair straightener moving clamp (2).
•
Put the unit on a flat steady and heat-resistant surface.
•
Insert the power plug into the mains socket.
•
Switch the unit on by pressing and holding the on/off
button (3) «
» for 3 seconds, you will hear a sound
signal and the default heating plates temperature
«180°C» will be flashing on the display (5).
Note: During the first operation some smell from the
heating element is possible, this is normal.
•
If necessary, set the required heating plates tempera-
ture by pressing the buttons «
+/-
» (4).
Hair type
Temperature
Damaged, colored,
bleached, fine
from +160°С to +180°С
Normal
from +180°С to +200°С
For professional styling
from +200°С to +220°С
•
When the heating plates reach the set temperature,
the temperature digital symbols will glow constantly.
Notes:
– To lock the preset temperature, press and hold the
button (4) «+» for 3 seconds, the display illumination
will light up blue.
– To unlock, press and hold the button (4) «-» for 3 sec-
onds, the display illumination will light up white.
•
Divide combed hair into locks of equal width (about
5 cm).
•
Place the hair lock between the plates (6).
IM VT-2527_70x130.indd 6
10/23/20 4:01 PM
