7
ENGLISH
Installing the glass rotary bottom plate
1. Open the oven door (2) by pressing the button (8).
2. Set the roller support (3) of the glass rotary bottom plate into the opening located in the bottom of the oven cavity.
3. Carefully set the glass rotary bottom plate (4) on the roller support (3). Never set the glass rotary bottom plate
with its bottom side up.
Note:
•
Do not hinder rotation of the glass rotary bottom plate (4) while oven operation.
•
Always use the glass rotary bottom plate (4) and the roller support (3) when cooking.
•
Food and cookware should be always placed only on the glass rotary bottom plate (4).
•
During operation of the oven the glass rotary bottom plate (4) can rotate clockwise or counterclockwise.
•
If cracks or shears appear on the glass rotary bottom plate (4), replace it immediately.
INSTALLING THE MICROWAVE OVEN
– Before switching the unit on, make sure that the operating voltage and input power of the unit correspond to
your mains specification.
– Connect the microwave oven to a mains socket with reliable grounding contact.
– Set the microwave oven on a flat and hard surface that will bear its weight and maximal weight of the products
which will be cooked in it.
– Do not install the unit in places with high moisture and temperature, and near inflammable objects.
– Set the unit in places out of reach of children.
– Place the microwave oven keeping at least a 20 cm gap from the sides and the rear of the oven to the wall and a
30 cm gap above the unit.
– Do not remove the supporting legs from the bottom of the oven.
– Do not block ventilation openings in the unit body.
– It is necessary to place the microwave oven away from TV-sets or radio receivers to avoid interferences in the
reception of TV and radio signals.
WARNING:
In case the oven is damaged due to the user, the user is deprived of the right for free warranty mainte-
nance and repair of the unit.
MICROWAVE OVEN OPERATION
Current time setting
1. Insert the power plug into the mains socket.
2. Press the
«Clock»
button (12), the 24 hour time format symbols («Hr 24») will be shown on the display (6).
3. To change the time indication format to 12 hours, press the
«Clock»
button (12) again, the symbols «Hr 12» will
appear on the display. Skip this step if you want to keep the 24 hour time format.
4. Use the buttons (11) to set the current time in hours and minutes.
5. To save the settings, press the
«Clock»
button (12).
Notes:
– If you have not saved the settings, then 20 seconds after the last pressing of the buttons the unit will be switched
to the previous settings.
– If you press the
«Reset»
button (15) during time setting, the unit will be switched to the previous settings.
– Press the
«Clock»
button (12) to see the current time during cooking.
DELAYED START FUNCTION
This unit allows not only to choose a cooking program, but also the cooking start time. The delayed start function is
set with the «Timer» button (16) (see «Cooking in the microwave oven»).
COOKING IN THE MICROWAVE OVEN
Before you start cooking, set the necessary cooking mode, microwave power level, cooking time, or choose an
automatic cooking program.
General information
– Insert the power plug into the socket and set the current time.
– Open the door (2), pressing the button (8), and put the products into the oven cavity. To prevent the oven cavity
from getting dirty, cover the products with a microwave-safe protective lid. Close the door.
– Set a cooking program or switch an automatic cooking program on (see below).
VT-1663_RUS.indd 7
11.02.2014 12:50:58
Summary of Contents for VT-1663 BK
