Vitek VT-1513 BK, Manual Instruction, Page: 6 / 48

6
ENGLISH
Drip tray (9)
- Remove the grid (10) from the tray (9), remove the tray (9) and pour out water, put the tray on its place,
put the grid (10) on the tray.
PROBLEMS, THEIR CAUSES AND SOLUTIONS
Problem Cause Solution
The coffee maker does not
switch on
No voltage in the socket.
Power plug is not completely
inserted into the socket.
Make sure that the socket is in
operating position.
Check whether the plug is com-
pletely inserted into the socket.
Water leaks away from the
lower part of the unit
The tray is full. Pour out water from the tray
Coffee leakage from the filter
holder
Filter does not firmly join the
densifier in the boiler, ground
coffee got on the edges of the
filter.
Clean the edges of the filter.
Coffee made has a strange
odor
Wrong process of scale removal
in the boiler
Improper storage of coffee
Refer to “Preparation to op-
eration”, “Scale removal” para-
graphs and repeat them several
times.
Use fresh ground coffee.
Keep coffee in a dry cool place
Steam does not whisk milk
Low temperature of the outgoing
steam
The tank is too large or its size is
improper
You used skimmed milk
Whisk milk only after the indica-
tor (5) lights up.
Use narrow high container to
whisk milk
Use only whole milk, with fat
status 4-6%.
FOR HOUSEHOLD USAGE ONLY
The unit does not have replaceable parts.
Specifications
Power supply: 230 V ~ 50 Hz
Power consumption: 1350 W
Specifications subject to change without prior notice.
Service life of appliance - 5 years
GUARANTEE
Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was
purchased. The bill of sale or receipt must be produced when making any claim under the terms of this
guarantee.
This product conforms to the EMC-Requirements as laid down by the Council Directive
89/336/EEC and to the Law Voltage Regulation (73/23 EEC)
VT-1513 IM.indd 6 12.04.2012 11:28:10