Vitek VT-1427, Manual Instruction

Page: 6 / 24

6
ENGLISH
use the stand mixer in the handheld mode,
i.e. detach the mixer from the holding
base (12).
• Make sure that the power cord plug is not
inserted into the mains socket, and the
operation mode switch (2) is set to the posi-
tion
«0» .
• Hold the mixer (4), then press and hold
down the release button (11) to remove the
mixer from the support (9) in the upward
direction.
• Insert the beaters (5) or the dough hooks (6)
into corresponding mixer (4) sockets until
clicking. Both attachments should be fixed
properly in the mixer openings (pic. 1, 2).
• Put the necessary ingredients into a suitable
container or the bowl (7).
• Insert the power plug into the mains socket.
• Switch the mixer on with the operation mode
switch (2) and select the desired attachment
rotation speed «
1, 2, 3, 4, 5 ».
• If you press and hold down the “TURBO”
button (3), the unit will operate at maximum
rotation speed.
• After unit operation, set the operation mode
switch (2) to the position
«0» and unplug
the unit.
• Press the button (1) to release the installed
attachments (5 or 6).
Attention! Do not press the attachment
release button (1) during the unit opera-
tion.
Using the holding base (12)
To complete more difficult cooking tasks
you can install the mixer (4) on the holding
base (12):
Press the « RELEASE » button (10) and lift the
support (9) until it is fixed in the upper posi-
tion (pic. 3).
• Place the mixer bowl (7) on the holding
base (12) (pic. 4).
• Install the scraper blade (8) in the mixer
bowl (7), matching the locks on the scraper
blade (8) with the grooves on the base (12)
(pic. 5, 6).
• Insert the beaters (5) or the dough hooks (6)
into corresponding mixer (4) sockets until
clicking. Both attachments should be fixed
properly in the mixer openings (pic. 1, 2).
Note: For proper assembling install the attach-
ment with a plastic gear (5 or 6) into the mixer
body (4) opening marked with a star.
•
Place the mixer (4) on the support (9)
matching the locks on the support (9) with
the openings on the mixer body (4) and
press on the mixer to actuate the locks
(pic. 8). The plastic gear on the attach-
ment must match the opening in the sup-
port (9) with installed plastic plug. Lift the
support (9) with the mixer (4) installed on
it having pressed the «
RELEASE » but-
ton (10).
• Put the necessary ingredients into the
bowl (7).
• Press the «
RELEASE
» button (10) and lower
the support (9) with the installed mixer (4)
until it is fixed.
• Insert the power plug into the mains socket.
• Switch the mixer on with the operation
mode switch (2) and select the required
attachment rotation speed «
1, 2, 3, 4, 5 ».
• If you press and hold down the “TURBO”
button (3), the unit will operate at maximum
rotation speed.
Attention! Be careful! During the mixer (4)
operation on the holding base (12) the
bowl (7) rotates and the mixer (4) with the
support (9) oscillates horizontally. Do not
touch the rotating parts of the unit. Do not
let hair or free hanging clothes get into the
rotation area. Do not let foreign objects get
into the bowl.
• After unit operation, set the operation mode
switch (2) to the position
«0» and unplug
the unit.
• Lift the support (9) with the mixer (4)
installed on it having pressed the release
button (10).
• Hold the mixer (4), then press and hold
down the release button (11) to remove the
mixer from the support (9) in the upward
direction.
• Press the button (1) to release the installed
attachments (5 or 6).
• Remove the bowl (7) from the hold-
ing base (12) and take products out of it.
To remove the bowl (7) from the holding
base (12) slightly turn it counterclockwise
and pull upwards.
IM VT-1427.indd 6 10.01.2018 10:07:54