Vitek VT-1427, Manual Instruction

Page: 5 / 24

5
ENGLISH
plug and carefully remove it from the mains
socket.
• Clean the mixer regularly.
•
Do not allow children to touch the unit body
and the power cord during mixer operation.
• Do not leave children unattended to prevent
using the unit as a toy.
• Place the unit out of reach of children during
breaks in the mixer operation.
• The unit is not intended for usage by physi-
cally or mentally disabled persons (including
children) or by persons lacking experience
or knowledge if they are not under supervi-
sion of a person who is responsible for their
safety or if they are not instructed by this
person on the usage of the unit.
• For children safety reasons do not leave
polyethylene bags, used as packaging,
unattended.
Attention! Do not allow children to play with
polyethylene bags or packaging film.
Danger of suffocation!
• Periodically check the power cord and the
plug isolation for damages.
• Do not use the unit if the power cord or plug
is damaged, if the unit works improperly or
after it was dropped.
• Do not attempt to repair the unit. Do not dis-
assemble the unit by yourself, if any mal-
function is detected or after it was dropped,
unplug the unit and apply to any authorized
service center at the contact addresses
given in the warranty certificate and on the
website www.vitek.ru.
• To avoid damages, transport the unit in orig-
inal package only.
• Keep the unit in a dry cool place out of reach
of children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, ITS COMMERCIAL USAGE AND USAGE
IN PRODUCTION AREAS AND WORK SPACES
IS PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage at low
temperature, keep it for at least three
hours at room temperature before switch-
ing on.
–
Unpack the unit and remove any stickers
that can prevent unit operation.
–
Check the unit for damages; do not use it in
case of damages.
–
Make sure that the operating voltage of
the unit corresponds to the voltage of your
mains.
–
Wash the attachments (5, 6), the scraper
blade (8), the spatula (13) and the mixer
bowl (7) with warm water and neutral deter-
gent, rinse them and dry.
–
Wipe the mixer body (4) and the holding
base (12) with a soft slightly damp cloth and
then wipe it dry.
Note: To remove the bowl (7) from the holding
base (12) slightly turn it counterclockwise and
pull upwards.
ATTACHMENTS
Beating/mixing attachments (beaters) (5)
Use the beaters (5) for beating cream and egg
white, making biscuit dough, puddings, cock-
tails, whipped cream, mayonnaise, puree and
sauces.
Dough hooks (6)
Use for kneading «heavy» dough and mixing
minced meat.
Note:
• Do not use the beater (5) and the dough
hook (6) at the same time.
BUTTONS DESCRIPTION
–
The attachment release button « EJECT » (1)
is used for removing the attachments (5)
or (6).
–
Use the operation mode switch (2) to select
the desired attachment rotation speed
«
1, 2, 3, 4, 5 ».
–
The button « TURBO » (3) is used for switch-
ing the maximal speed on.
–
The folding support release button
«
RELEASE » (10) allows to unlock the fold-
ing support (9) to change its position.
–
The mixer release button (11) allows to
detach the mixer (4) from the folding sup-
port (9) of the holding base (12).
USING THE UNIT
Using the mixer (4).
You can use the mixer (4) as a separate unit
not installing it on the holding base (12).
For quick and quality making of small por-
tions of products (when whipping or mixing)
IM VT-1427.indd 5 10.01.2018 10:07:54