5
ENGLISH
contact with the products, in this way the mix-
ing is thorough.
–
Insert the power plug into the mains socket.
–
Switch the mixer on with the switch (2) turning
it clockwise and select the attachment rotation
speed (see the table). To switch the maximal
rotation speed on during the mixer operation,
press and hold the «TURBO» button (1).
–
Do not hinder rotation of the bowl (12) during
the unit operation.
–
After the unit operation is finished, set the
switch (2) to the utmost left position and
unplug the unit.
–
Press and hold down the button (9), remove
the mixer (4) from the support (8).
–
Hold the attachments (6) or the beaters
(7) with one hand, press the «EJECT» hook
release button (3) with the other hand and
remove the hooks.
–
Press and hold down the button (11), lift the
support (8) and release the button (11).
–
Remove the bowl (12) from the base (10).
Note:
You can use the unit as a handheld mixer;
for this install the hooks (6) or beaters (7) and
use a suitable bowl.
RECOMMENDED OPERATION MODES
Product type
Recommended
product amount
Attachment
rotation
speed
Approximate
operation
time
Used attachments: beaters (5)
Beating egg whites
6
high
2-4 min.
Whipping cream
300 ml
from minimal
to maximal
4 min.
Mixing ingredients for dough
400 g
from minimal
to maximal
1.5 – 2 min
Beating melted butter
400 ml
high
1 min.
Mixing butter with flour (if necessary, you
can add some water for getting doughy
consistency)
150 g
low
low
4 min.
1 min.
Used attachments: dough hooks (6)
Kneading yeasted dough
350 g
from minimal
to maximal
2-3 min
Butter
400 ml
high
1 min.
Mixing butter with sugar
350 g
high
1 min.
Note:
Recommended product amount, attachment rotation speed and operation time are given for
using the mixer bowl (12).
CLEANING AND CARE
–
Switch the unit off and unplug it.
–
Wash the hooks (6) or beaters (7) and the bowl
(12) with warm water and a neutral detergent,
then dry them.
–
Clean the mixer body (4) and base (10) with
a soft, slightly damp cloth, and then wipe
it dry.
–
Do not immerse the mixer body (4), power
cord and plug into water or any other liquids.
–
Provide that no water or detergent gets inside
the support (8).
–
Use neutral detergents to remove dirt; do not
use metal brushes, abrasive detergents and
solvents.
STORAGE
–
Clean the unit.
–
Keep the unit out of reach of children and dis-
abled persons.
IM VT-1425.indd 5
30.11.2017 17:40:54
