Vitek VT-1330, Manual Instruction

Page: 6 / 44

6
ENGLISH
– Attach the nozzle (3) to the hairdryer body. The noz-
zle (3) allows directing a narrow air flow of high inten-
sity at a definite hair lock.
– Insert the power plug into the mains socket. Use the
switch (1) to set the necessary operation mode.
«Cool air» supply
This model has a cool shot button for fixing your hair.
Press and hold down the cool shot button (2) «
» –
it enables to keep the created style.
–
After unit operation, switch the hairdryer off by setting
the switch (1) to the position «
0 », and unplug it.
Overheating protection
Overheating protection switches the hairdryer off if the
outgoing air flow is too hot. If the hairdryer switches
off during operation, set the operation mode switch (1)
to the «
0 » position, unplug the hair dryer and make
sure that the inlets and outlets are unblocked. Let the
hairdryer cool down for 5-10 minutes and switch it on
again. Do not block the air inlets during the hairdryer
operation and keep your hair from getting into the air
inlet grid (4)
CLEANING AND CARE
– The hair dryer is intended for household use only.
– Set the switch (1) to the position « 0 » and disconnect
the hair dryer from the mains.
–
You may wipe the unit body with a damp cloth and
then wipe it dry.
– Clean the air inlet grid (4) with a brush.
– Never immerse the unit into water or other liquids.
– Do not use abrasives and solvents to clean the unit
body.
STORAGE
– Unplug the hair dryer if you are not using it.
– Let the hair dryer cool down after its usage, keep the
unit away from children in a dry cool place.
– Never wind the power cord around the hairdryer, as
this can damage the cord. Handle the power cord with