3
Power & Video Connections
Monitor
Video
12VDC / 24VAC Power
Connect the HD-TVI Video or AHD/CVBS video connector to a BNC
patch cable, then to a DVR. Next connect the power connector to a
12VDC or 24VAC power adaptor.
Installation
1)
Disconnect power before installation.
2)
Confirm proper 12VDC or 24VAC power supply is used to prevent
damage to the camera.
3)
Do not use in an environment beyond the boundaries of the
specifications.
Video Output Mode Switch:
Select the desired video mode using the dip switches
contained within the on-cable Output Mode Switch as follows:
ON
1
2
ON
1
2
HD-TVI
ON
1
2
AHD
ON
1
2
CVI
ON
1
2
CVBS
EXAMPLE:
1 & 2 Off
