Operating Instructions
5. DAY&NIGHT
SMART IR
ANTI-SAT.
DELAY
IR LED CTL
RETURN
ON
MIDDLE
AUTO
llllllllllllllllllllll
10
5. DAY & NIGHT
DAY/NIGHT is used to control the setting during day-time and night-time operation.
Select the mode according to the light condition and the camera types.
MENU V0. XX
1. LENS
2. ZOOM/FOCUS
3. EXPOSURE
4. BACKLIGHT
5. DAY&NIGHT
6. COLOR
7. 3D-NR
8. IMAGE
9. MOTION
A. SYSTEM
B. EXIT
OFF
EXTERN
MIDDLE
OFF
SAVE
DC
5-1-1. SMART IR
5-1. EXTERN
5-1-2. ANTI-SAT. (Available only with the SMART IR is ON)
5-1-3. DELAY
: D→N DELAY is time in seconds while camera maintains its status before
Day to Night switching. DELAY can avoid the unwanted/frivolous switching
by short term lights such as light from a passing car. Set delay term to
low, middle or high.
5-1-4. IR LED CTL
: IR LED Control(AUTO/OFF) is available with IR LED model only.
If it is set to OFF, IR LED will be turned OFF but DAY or NIGHT is still
determined by the built-in light photo sensor.
: Sets the anti saturation level 0~20. Setting high level avoids the saturation
but the corners will be darker accordingly.
: SMART IR can be set to reduce the saturation of strong IR illumination
at night in any menu of EXTERN, AUTO and B/W(NIGHT). Set to ON,
SMART IR is enabled and ANTI-SAT. level is controlled.
DAY or NIGHT is determined by the built-in light photo sensor for
cameras with built-in IR LEDS..
18
19
Summary of Contents for STARLIGHT VTC-IRM30-2812
Page 29: ...29 ...
Page 30: ...30 ...
Page 32: ...28492 CONSTELLATION ROAD VALENCIA CA 91355 WWW VITEKCCTV COM Version 1 0 September 2017 ...
