2-2
FIM-102D FIBER INTERFACE
Inspect the units for mechanical damage. Inspect all electrical connectors for bent or damaged pins and latches.
Report any damage to the carrier and to Clear-Com Intercom Systems.
Leave the protective plastic caps on the optical connectors until it is time to attach the fibers to the units.
INSTALLING AN FIM-102D UNIT IN A RACK
A frame for mounting multiple FIM-102D units is available. Please contact the Clear-Com sales department for
information.
SELECTING AND INSTALLING FIBER-OPTIC CABLE
The person installing the FIM-102D units is responsible for providing the fiber optic cable runs. The FIM-102D will
operate with either Single-Mode or Multi-Mode Fiber Optic Cable. You will experience the best distance
performance when using Single-Mode cable as shown in Table 1.
