YOUR VITAPUR® WATER DISPENSER
1. Control panel
2. Kettle Feature (on/off) activation button
3. Ready-to-dispense indicator lights
Red Light: “Flashing” = Heater (hot water tank) is operational
Red Light: “Steady On” = The hot water has reached optimum temperature and is ready for dispensing.
Red Light: “Off” =
Hot water tank heating system is off, however water within the tank may still be very hot,
always exercise caution when dispensing and/or draining water from the hot water tank.
Blue Light: “Steady On” = The cold water has reached optimum temperature and is ready for dispensing.
Blue Light: “Off” =
The cooling cycle is in progress, it is possible to dispense water during the cooling
cycle, however, optimum cooling temperature may not yet be achieved.
Yellow Light: “Flashing” = Low water level inside internal reservoir, water bottle empty.
Yellow Light: “Off” =
The status of all water levels are normal.
4. Child resistant safety switch
5. Hot water dispensing button
6. Room temperature water dispensing button
7. Cold water dispensing button
8. Removable drip tray
9. Lower door (bottle storage compartment)
10. Water dispensing spigots
11. Stainless steel straw (water bottle)
12. Door Switch (Controls water pump operation)
13. Adjustable “cold” water thermostat.
(Note: hot water temperature is factory
set and cannot be adjusted)
14. Carry handle
15. Drain valve
16. Condenser coil
2
1
4
5
6
7
8
9
3
2
10
13
14
15
16
12
11
