8
The following accessories are compatible to use with Venturist Series blenders. Refer to vitamix.com for more information.
•
Self-Detect 48 oz. (1.4 L) Wet and Dry Containers
•
Self-Detect 8 oz. Bowl (240 ml) and Blade Base*
•
Self-Detect 20 oz. (0.6 L) Cup and Blade Base*
•
Tamper Holder Assembly*
•
Blade Scraper
•
Vitamix Perfect Blend App
•
Perfect Blend™ Smart Scale
*Note: The 20 oz. (0.6 L) cup, 8 oz. (240 ml) bowl, Tamper and Tamper Holder Assembly have not been evaluated as part of NSF certification
a
p p e n d i x
1 - a
cc e S S o r i e S
T
amper
H
older
use
and
care
insTrucTions
Note:
When properly installed, the tamper holder will not interfere with
blender operation. The tamper holder can be installed on the left or right
side of the motor base.
1.
Clean the parts by hand with warm, soapy water or in the top rack in
the dishwasher before assembling.
2.
Choose a side of the motor base to install the tamper holder.
3.
Lift up the blender base. Put the tamper holder base onto the blender
frame. Lower the blender base back onto the work surface or counter.
Put the tamper holder cup onto the tamper holder base. Twist the
tamper holder cup clockwise to lock into place.
4.
Make sure the blender is sitting flat and steady (no rocking side to
side) before blending. When installed properly, the inside flat surface
of the tamper holder cup will sit flush with the side of the blender (See
photo).
5.
Remove the tamper holder from the blender regularly to clean. To
remove the tamper holder cup, rotate the cup counter-clockwise.
6.
To remove the base, lift up on the motor base and remove the tamper
holder base.
B
lade
s
craper
use
and
care
insTrucTions
1.
Clean the parts by hand with warm, soapy water or in the top rack in the dishwasher before use.
2.
Use the blade scraper to remove thick ingredients like jam and peanut butter from under the blades only after the
container has been removed from the motor base.
Keep hands and utensils out of container while blending to reduce the risk of severe injury to
persons or damage to the blender. A rubber scraper, spatula or blade scraper may be used,
but only when the blender is not running and after the container has been removed from the
motor base.
Do not leave foreign objects, such as spoons, forks, knives, scrapers, spatulas or the lid plug,
in the container as this will damage the blades and other components when starting the
blender and may cause injury
.
IMPORTANT!
Proper installation
(flush against motor base)
