6
CONTROLS
6
1
2
3
4
5
Speed Control
Pre-Set Program Buttons
High/Low Pulse
Reset/Off Power Switch:
Located on the back of the motor base, the Reset/Off switch
controls the power to the machine. While plugged in, switch to Reset to ready the machine
for blending. Shut off the power switch at night or whenever the machine will be left
unattended.
Start /Stop Button:
Pressing Start( )/Stop( ) once starts and runs the machine and
turns the blade. Press Start/Stop button again to stop the machine and the blade.
Speed Buttons:
Press the button to gradually increase the speed of the blade in
increments of 1%, up to 100%. Press the button to gradually decrease the speed of the
blade in increments of 1%, down to 7%. Speed is used to set the blending speed of the
Pulse buttons (see Instructions, page 9) and the Start/Stop button.
These settings will
reset if the power is shut off.
Pre-Set Program Buttons:
The machine will stop by itself when the cycle is complete. A
cycle varies in speed and length.
Pressing one of the Pre-Set program buttons, while the
motor is running, will stop the machine.
Pulse Buttons:
The pulse provides a quick increase or decrease in speed of the blade when
blending or refreshing a drink. Press
to increase the motor to speeds that range from
51%-100%. Press
to decrease the motor speed down to a range of 50%-7%. The Pulse
button will override the running program as long as it is depressed. Once released, the
original program continues its cycle.
•
The Pulse High (
) and Low (
) speed is set by using the Speed buttons.
To set, while pressing and holding a Pulse button, press the Speed or button until
the desired motor speed is reached. The pulse speed will remain at this setting until
changed again with the Speed buttons.
Display Window:
This area, depending on which button is pressed, displays a variety of
operation messages. A “Ready” message appears when there is power to the machine.
