Portion Blending System
TM
ON/OFF switch - Located on the back of the machine the ON/OFF switch controls
the power to the PBS. With the machine plugged in, switch the machine to ON to
ready the machine for shaving ice and blending.
START/STOP button - Pressing START/STOP once starts and runs only the blender on the
PBS. While the blender is running you may add ice by pressing and holding the SHAVE
ONLY button. Release the SHAVE ONLY button to stop adding ice. Press the START/STOP
button again to stop the blender and the container blades.
(
NOTE:
Pressing one of the PRE-SET PROGRAM buttons or the PRE-SET SPECIALTY
DRINK buttons, while the motor is running, will also stop the machine.)
BLENDER SPEED CONTROL button - Press the
▲
button to gradually increase the
speed of the blender blades in increments of 1%, up to 100%. Press the
▼
button to gradu-
ally decrease the speed of the blender blades in increments of 1%, down to 7%. SPEED
CONTROL is used to set the blending speed of the BLEND ONLY button and the
START/STOP button.
NOTE:
These settings will reset if the power is shut off.
PRE-SET PROGRAM buttons - These buttons, numbered 1 thru 4, are pre-programmed
blending cycles designed for your most commonly made drinks. These four buttons would
commonly be programmed to produce from one to four 12 oz. (355 ml) drinks. (Button 1
builds one 12 oz. (355 ml) drink, Button 2 builds two 12 oz. (355 ml) drinks, etc.)
Pressing one of the four PRE-SET PROGRAM buttons will run the machine for a full cycle.
The machine will stop by itself when the cycle is complete. A cycle varies in ice weight and in
speed and length, see Instructions on page 10 for a complete description of the range of each
PRE-SET button. See page 12 for information on Custom Programming these four buttons.
PRE-SET SPECIALTY DRINK buttons - These buttons, A thru B, are also pre-programmed
blending cycles designed for specialty drinks, drinks of the week, and secret recipe drinks.
See page 10 for instructions on using the SPECIALTY DRINK buttons. See page 12 for
information on Custom Programming these buttons.
TM
READY
Start/Stop
Blender Speed Control
Four Factory
Pre-Set
Programs
Pre-Set Specialty Drink Buttons
Owner Controls
Blend Only
Shave Only
Display Window
8
OFF
ON
