background image

Removing Ice from the Ice Bin

WARNING:

To reduce the risk of injury unplug the unit

before removing ice from the Ice Bin. Do not operate without lid
in place.

1. With the machine off and unplugged remove the Ice Bin Lid.

2. Use an ice scoop to remove as much ice as possible from above the Ice Shelf.

3. Remove the Ice Shelf and pour in 8 cups (1.9 liters) of warm water in a circular motion in

the Ice Bin and allow to drain.

Care Note

To ensure that you get the longest possible life from your Vita-Mix

®

product, we recommend 

the following products, when used as directed by the supplier:

Cleaning Product

Supplier

Solid Supra, Solid Power,   .  .  .  .  .  .  .  .  .  .  .  .  . Ecolab, Inc., St. Paul, MN
Guardian Acclaim, Solid Guardian Plus,

Tel: (800) 352-5326;

Solid Super Impact, Solid Insure

www.ecolab.com

Diverpak  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . Diversey
Eclipse H2

Livonia, MI

Liqui-Safe L7

Tel: (800) 521-8140

Acclean  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   Klenzade Products, Division of Ecolab
Poly-Brite

St. Paul, MN
Tel: (612) 293-2165   

Glow MB-1  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

Wesmar Company, Inc., Seattle, WA

Lustre NC-25

Tel: (206)783-5344;

Lustre Plus

www.wesmar.com

PSRA 41-D, PSRA 41-E  .  .  .  .  .  .  .  .  .  .  .  .  .   Anderson Chemical Co.
Liqui-Ware 1, Liqui-Ware MC

Litchfield, MN

D-Flex, Sur-Met

Tel: (800) 366-2477
www.andersonchemical.com 

Rinse Aids

Supplier

Solid Rinse Dry  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . Ecolab, Inc., St. Paul, MN
Solid Brilliance

Tel: (800) 352-8140

Jet Dry, Rinse Dry

www.ecolab.com

Destainer

Supplier

NuWare .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  . Diversey

Livonia, MI
Tel: (800) 521-8140

18

Summary of Contents for PORTION BLENDING SYSTEM

























Reviews: