Vitalograph In2itive User Manual
Cat. No. 07514
Issue 5
Page 23 of 45 DT_0006-6
b) Pump air through the flowhead to bring it to ambient
temperature. If the flowhead has very recently been
used for testing or has come from a cold environment,
its temperature should be equilibrated with ambient by
pumping air through it from the syringe several times.
c) Press the ‘Enter’ key to bring you into the
Calibration
screen and follow the on-screen instructions.
Note: Press the ‘C’ key to exit the
Calibration
screen.
d) If a Calibration report is required select the Report
option.
Settings
This allows you to adjust the settings of the device. The following
options are available in the
Device Settings
screen:
-
Date/Time
-
Sound Options
-
Incentive
-
Units
-
Power Save Options
-
Parameters
-
Volume
Date/Time
There are two tabs in this screen for the time and date.
a) In order to change the time, scroll the hours and
minutes to the required settings by pressing the
arrows on the touch panel LCD.
b) The time format can be changed from 24 hour to 12
hour by switching On/Off the ’24 Hour Format’ option.
c) In order to change the date, scroll the day, month and
year to the required settings by pressing the arrows
on the touch panel LCD.
d) To modify the Date Format select the required option
from the drop done list. The options available are:
DD/MM/YYYY
MM/DD/YYYY
YYYY/MM/DD
