Vitalograph In2itive User Manual
Cat. No. 07514
Issue 5
Page 18 of 45 DT_0006-6
d. Press ‘Enter’ to bring you to the test
screen. The text Post
Mode will appear on the graph.
4. Perform the Post FVC test as outlined in section Performing a Test
Session.
Permanent Storage of Pre-Test Sessions
The
Post Mode
screen also gives you the option to save and recall
test sessions to and from a permanent storage location on the device.
This permanent storage does not get deleted when test sessions are
sent to Spirotrac V or printed. To access this option select ‘Permanent
Storage’.
The
Permanent Storage
screen gives you four options:
1) Save Test to Permanent Storage: When this option is selected a
message will appear informing you of the memory location where
the test session will be saved. There are nine permanent memory
locations on the Vitalograph In2itive.
2) Load Test from Permanent Storage: When this option is selected
the list of permanent pre-test sessions will appear. Select the
required pre-test session from the list and select enter to bring you
into the Post Mode screen.
3) Delete Test from Permanent Storage: When this option is selected
the list of permanent pre-test sessions will appear. Select the Test
session you wish to delete and press enter. This location will then
be marked as ‘Empty’.
4) Delete all Tests from Permanent Storage. When this option is
selected a warning message will appear:- ‘Do you want to delete all
tests stored in permanent storage?’. Press enter to delete all tests.
Printing and Viewing the Test Session
You can print the current test session for the subject by selecting ‘Print’
from the
FVC
Test
screen.
The Vitalograph In2itive can be connected through the USB port at the
side of the unit or from the cradle to the Vitalograph Reports Utility, so
that the report can be written to a PC. By using the optional Print
Cradle the Vitalograph In2itive can also be connected to an external
PCL compatible printer.
