Signal
Acoustic Signal
Optical Signal
Open electrode
At the rate of the flashing icon
Flashing of the corresponding point
on the display
Closed electrode
-
Illumination of the corresponding point
on the display
Leaving range
Longer pulsating sound for 1 minute
Radio symbol on display is
deactivated
Exceeding or falling short of the
configured threshold for the heart rate
Two brief sounds, one per second
R wave detected
Brief sound
Heart symbol flashes briefly
Switching off the device
After pressing button for 2 seconds, a
2-second sound
-
Error message
-
Data memory full
-
Data memory almost full
-
Radio active - Bluetooth is connected
-
Crossed out loudspeaker - audio is
muted
-
7. CLEANING INSTRUCTIONS
7.1 Maintenance
To maintain the ECG measuring unit change the batteries as required. See also Section 5.1.
Remove the batteries if storing the device for a long period of time without using it to avoid damage to the device.
An annual service is recommended. Service and repairs should be carried out only by the manufacturer or by Service
Agents specifically approved by Vitalograph.
7.2 Disposal
The device must be taken to separate collection at the product end-of-life. Do not dispose of these products as unsorted
municipal waste. Please note, that batteries must be disposed of separately.
7.3 Cleaning and disinfection of the surface of the device
Ensure the ECG measuring unit is turned off prior to cleaning/disinfecting. The device is not intended to be waterproof
and as such must not be submerged, have liquids poured or sprayed on it.
To clean, wipe the housing with a soft, moist cloth.
For disinfection use Incidin® Foam oder Mikrozid® AF Liquid or equivalent. Please refer to the specific manufacturers
instructions for use prior to disinfecting.
07657_3
file:///C:/Users/mike/Downloads/07657-3 (1)/07657_3.html
15 of 28
6/27/17, 1:41 PM
