- 5 -
SAFETY RULES
Follow general safety rules for exploitation of electrical devices.
Power supply unit
of the apparatus switched on from the socket has dangerous alternating voltage.
Keep the main body of the device dry.
IT IS FORBIDDEN
to wipe a switched
device with a wet napkin and to use the apparatus in the bathrooms or at the shower
cabins. It is also forbidden to apply the device switched to the socket of a car when the
car is moving.
In the case of and damages or malfunctions in the device, one should apply to the
repairing centers, enlisted in the chapter “Guarantees”.
IT IS FORBIDDEN to repair or
modernize the apparatus by ones own or with the help of unprofessional specialists.
ATTENTION!
For fire safety before using the device make sure that the socket
is in order and the plug is undamaged.
Keep the apparatus from falling down. Its vibrophones include optical and fine
mechanical parts that should be kept from hitting by hard surface and falling. Do
not lay vibrophones cords along.
It is recommended to place the apparatus at the table, bed-side table etc. where it will
be safe from falling and easy to operate. The device can be connected with the help of
professionally manufactured extender. When the treatment is over, the device should be
switched off and placed to its original box.
EXPLOITATION, TRANSPORTATION AND STORAGE RULES
The apparatus is to work properly for a long time in the following conditions: air
temperature: + (25+10)
о
С
; relative humidity: 45 – 80%.
To keep the device in working condition, one should ship and store it duly packed,
air temperature being within (-10 – +40
о
С
) and relative humidity not more than 80%.
During long breaks between using sessions the apparatus should be stored in its initial
package. After a long-distance shift or cooling, the device is to stay in the normal
conditions (room temperature) unswitched for 2 hours.
For disinfection the main body and converters of the apparatus are to be wiped with a
napkin slightly moistened with a 3% hydrogen peroxide solution.
STRUCTURE AND WORKING PRINCIPLES
The
VITAFON-T
apparatus (see picture 1) consists of a main electronic block (1)
and two joint converters, the so-called “vibrophones” (2). At the main electronic block
there is a socket (9) via which an external power source can be connected with the
device. Power supply unit working from alternating current network included to the kit
(3) or a power system of a car (voltage – 12 V) can be used as a power source of the
device. The apparatus can be connected with a power system of a car via special power
cord (10) trough the socket of a lighter, built-in to the car’s control panel. On the face
panel of the main block there are main tools of data entry and control (4 – 7) and a
digital display (8). Number of the chosen Mode and duration of the treatment session are
indicated on the display.
Main electronic block of the device provides realization of the programmed parameters
and produces signal, necessary for functioning of vibrophones. In contact with body tissues,
membranes of vibrophones produce microvibrations of bodily tissues within the zone
treated. Frequency of microvibrations automatically changes in accordance with a pre-given
cycle program within the range of sound frequencies.
