35
4. Materials and firing programs
5. Firing window
6. Settings
Pressing time and pressing pressure 2
Starting the pressing program
2
2
2
1
1
Confirm the message. This causes the
lift plate to move to the bottom
position.
Once you have inserted the pressing
material, confirm the message. The lift
plate will move into the firing chamber.
The programs starts.
Start the pressing program
without a pressing object.
Note:
•
Pressing time: 0:00 min – 120:00 min
•
Pressing pressure: The pressing pressure is changed using the "Change pressing pressure" button.
•
Pressing time 2 runs in accordance with the set time.
Note:
•
While the pressing material is moving in, the pressure cylinder will temporarily extend and retract. If the number of pellets is
incorrect, a message will appear.
•
Red curve: temperature; light gray curve: vacuum; black curve: pressure.
ADDITIONAL
INFORMA
TION
SCOPE OF SUPPL
Y/
VIT
A SYSTEM SOLUTIONS
TECHNICAL DA
TA
SETTINGS
FIRING WINDOW
MA
TERIALS AND
FIRING PROGRAMS
OPERA
TION
FIRST USE
THE SYSTEM
