33
4. Materials and firing programs
5. Firing window
6. Settings
4. Materials and firing programs
5. Firing window
6. Settings
5.2 Firing program: Pressing curve
2
1
3
Note:
•
Modified parameters will affect the active firing process. If you want to make permanent changes to the firing programs,
you will need to save them.
•
All the buttons (except Start temperature, Pressing time/Pressing pressure 1 and Pressing time/Pressing pressure 2) are
described in section 5.1.
•
The main vacuum cannot be altered in the pressing program. The vacuum is controlled automatically throughout the entire
pressing time.
Night mode
Back
Save
Program stop
Program start
Rise time/gradient
Pressing time and
pressing pressure 1
Pressing time and pressing pressure 2
Firing temperature/holding time
Start temperature
Duration of
firing program
Cooling temperature/
cooling time
Cooling lift position
Main vacuum
Process data
ADDITIONAL
INFORMA
TION
SCOPE OF SUPPL
Y/
VIT
A SYSTEM SOLUTIONS
TECHNICAL DA
TA
SETTINGS
FIRING WINDOW
MA
TERIALS AND
FIRING PROGRAMS
OPERA
TION
FIRST USE
THE SYSTEM
