29
VITA V60 i-Line
®
21.7 PIN-input for firing programs
Firing programs can be protected against changes by entering a PIN.
The PIN entered here is then used to protect individual firing programs.
Protected programs can be used by any operator. Changes can be made once.
However, the PIN is required in order to save the changes.
To call up the PIN input area, press the settings button followed by the PIN
button for program settings.
PIN-locking input for programs:
– In the "PIN" field, enter "0000"
– In the "New PIN" field – enter a new 4-digit PIN
– In the "Repeat new PIN" field – enter the new PIN again
PIN-unlocking input for programs:
– In the "PIN" field – enter the PIN
– In the "New PIN" field – enter "0000"
– In the "Repeat new PIN" field – enter "0000"
Important!
If the PIN is mislaid, unlocking can only be performed in the
factory!
21.8 Locking firing programs
In order to protect firing programs against permanent changes by other users,
they can be locked using a PIN.
Set the firing program that is to be locked and press the program lock button.
Enter the PIN using the keypad shown and confirm. If a personal PIN has not
been entered via the settings / program PIN (see section 27.1), the program
can be locked using the factory default PIN "0000".
Program lock button
PIN
New PIN
Confirm new PIN
Glaze Firing
Glaze Firin
Summary of Contents for V60 i-Line
Page 2: ......
