OWNER CONTROLS -
A control panel accessible by pressing the Vita-Mix logo.
•
Press once
to reveal the mode message. Press button 1 then 6
within five seconds to continue. Once the correct code is entered the
display will indicate the motor temperature (Norm, Warm, Hot), a
usage count and a total. The ‘count’ is a machine usage total and
can be reset. This can be used to keep a count of the number of
drinks sold in a week, day or even an hour. To clear, press and hold
the START/STOP button for 5 seconds. The ‘total’ keeps track of
the machine usage, including production and testing, and cannot
be cleared.
•
Press twice
to reveal the name of the program controlling the
PRE-SET buttons. If you are using the factory settings this will read
VITA-MIX BASIC PROGRAM.
• Press a third
time to reveal an option to reset the PRE-SET buttons
to the original factory settings.
•
Press a fourth
time to exit and continue blending.
HIGH/LOW PULSE button -
The pulse provides a quick increase or decrease in speed
of the blades when blending. Press H to increase the motor to speeds that range from
51%-100%. Press L to decrease the motor speed down to a range of 50% -7%. The PULSE
button will override the running program (as long as it is depressed). Once released the
original program continues its cycle.
• The PULSE high(H) and low(L) speed is set by using the SPEED CONTROL buttons.
To set, while pressing and holding a PULSE button, press the SPEED CONTROL
▲
or
▼
button until the desired motor speed is reached. The PULSE speed will remain
at this setting until changed again with the SPEED CONTROL buttons.
MODE
TEMP
COUNT
TOTAL
NORM
25
100
VITA-MIX BASIC
PROGRAM
4 TO OVERWRITE
CURRENT PROGRAM
5
