User manual 7
4 ATM functionality configuration
Each ATM based unit has 1 HTTP connection and 2 USB ports. To configure the connections
on the VX-ATM unit it is necessary to access as Administrator user.
Note:
In the configuration interface the ATM connections are shown as POS (Point of sale),
bear in mind that for all purposes the terms are equivalent.
In the Configuration tab select the POS section, the following window will appear.
Figure.- 4 ATM configuration window
In this window you can configure the ATM connection to the unit. For the ATM function is
running and active
it’s necessary to configure the camera recording frequency (either time-
lapse or event) and select the camera associated to the ATM in the Configuration/POS
screen.
Point of Sales:
– POS: ATM ID.
Last connection state
: It shows the connection status by the icon status.
Connected
, the cable is connected properly, it has a camera assigned and a
recording frequency.
Offline
the cable is connected properly but it doesn’t have a camera
assigned or a recording frequency.
Off
is neither connected nor active.
POS protocol
: This is the communication protocol between the ATM and the VX-ATM by
default SIDG.
HTTP Id
: ATM ID when the HTTP protocol is used.
Camera
: camera assigned to the ATM.
Time-lapse recording
: Camera recording frequency in working hours and non working hours.