The following table shows how to directly control the DMX values. The
DMX port needs to be switched to output. The table uses dmx channel #1 as
an example. The number ’1’ can be replaced by any number in the range of
[1,512].
String
Description
core-dmx-1=
<
integer
>
Set the value of DMX channel #1
The following table uses timer #1 as an example. The number ’1’ can be
replaced by any number in the range of [1,4].
String
Description
core-tm-1-start
Start timer #1
core-tm-1-stop
Stop timer #1
core-tm-1-restart
Restart timer #1
core-tm-1-pause
Pause timer #1
core-tm-1-set=
<
text
>
Set timer #1 at the time-string
The following table uses variable #1 as an example. The number ’1’ can be
replaced by any number in the range of [1,8].
String
Description
core-va-1-set=
<
integer
>
Set the value of variable #1
core-va-1-refresh
Refresh variable #1; a trigger will be generated as if the
variable changed value
core-va-refresh
Refresh all variables; triggers will be generated
The following table shows how to active miscellaneous functions.
String
Description
core-blink
Momentarily flashes the IoCore2’s LED
core-hello
The unit will reply with the same Hello message
65