The vManager software also allows you to change the Art-Net destination IP.
The destination IP determines where the outgoing Art-Net data will be send to.
Typically, this field contains a broadcast address like 2.255.255.255 which will
send the Art-Net data to the 2.x.x.x IP range. Another typical Art-Net broad-
cast address is 10.255.255.255. When using broadcast address 255.255.255.255
then all the devices on the network will receive the Art-Net data.
It is also possible to fill in a unicast address like 192.168.1.11; in this case
the Art-Net data will be send to one IP address only. This keeps the rest of the
network clean of any Art-Net network messages.
8.8
sACN
Figure 8.9: sACN settings
The IoCore2 supports 1 incoming sACN universe and 1 outgoing universe.
Each universe field should hold a number in the range of [1,63999]. Outgoing
sACN transmission can be disabled by entering ’off’ into the sACN output fields.
8.9
OSC
External equipment sending OSC messages to the IoCore2 need to be aware of
the number specified in the ’Port’ field. This is the port the IoCore2 listens to
for incoming messages.
Figure 8.10: OSC Settings
The IoCore2 will send its outgoing OSC messages to the IP addresses specified
39
