Guardian VIP
March 2019
Visual Engineering
Video solutions. Integrated
visualengineering.co.uk
Page 39
Camera Node Configuration
Control of the camera nodes and the video encoder in the Base Station is achieved via a web
browser interface.
The web browser allows control of the camera recording functions and control over camera
parameters such as encoder and network settings.
It also allows the firmware in the camera to be updated, should this be necessary.
All parameters are non-volatile, meaning they will be remembered after re-powering the camera.
Simply type the camera’s IP address into the address bar of the Firefox web browser, as shown
below with the example address 192.168.1.190
Node
Video Encoder IP
Base Station
192.168.1.190
Relay Node 1
192.168.1.191
CCTV Node 2
192.168.1.192
CCTV Node 3
192.168.1.193
CCTV Node 4
192.168.1.194
CCTV Node 5
192.168.1.195
Default Encoder IP Addresses
Below is a list of the default addresses of the Video Encoders in a system containing a Base Station,
three CCTV nodes and one Relay node. These specific IP addresses will need to be typed into the
web browser address bar.
Camera Login
On trying to establish a connection the user will be prompted for the User Name and Password,
enter the following details:
Default
User
Name
is:
root
Default
Password
is:
1234
