Guardian VIP
March 2019
Visual Engineering
Video solutions. Integrated
visualengineering.co.uk
Page 11
Connect an Ethernet
network cable between
one of the RJ45 sockets
and Operator’s Laptop.
Switching the Base Station on
The Base Station will default off when DC power is connected to the rear.
Users should always use the Base Station with DC connected. When the DC power is connected the
Base Station will be able to charge the spare camera node batteries.
The Base Station has an internal UPS battery, this is capable of powering the unit without additional
DC power into the rear. However, the internal battery should be saved for emergency UPS
operation only. When running on internal UPS battery the Base Station cannot charge the spare
camera node batteries.
To turn on the Base Station press and hold the button on the front for three seconds. The LEDs on
the front panel should now be lit, as described below.
Connect Base Station’s
mains power supply for
the Base Station here.
