Visual Circuits ReelTime 4, User Manual

Page: 52 / 75

Troubleshooting Tips
44
Mouse lags and overall poor system
performance
❏
Verify ATA 66 to ATA 33 compatible components and
drivers. A different IDE bus driver may be required for
proper system performance.
MPEG will not play on mapped network drive
❏
This will not work unless you set network=1.
Vidserve does not work at all
❏
Only one program can access the driver at a time. Close all
programs using the VCC4PRO driver and run Vidserve
again.
Monitors roll / lose sync when files are
loaded
❏
Set InitOnOpen to 0 and test. A blackburst or external
display sync source may be required. Consult your Visual
Circuits representative for details on RT Daughter card
options.
All channels pause when a new file is
started on a channel
❏
Be sure buffers are fully loaded prior to playing. As the
number of channels being used increases, this delay may
need to be increased depending on individual server system
resources. Test with maximum channels playing to
determine the system’s threshold and maximum delay
required.