VISTEK V165X serial digital
video router module
8
Issue 1
Switches 6-8
These switches are only used on the V1651 to set up the operation of the automatic mode.
Switch 6 on
Lock Fail
Sets the fail condition to occur when the currently selected source does not
lock up the re-clocker ic.
Switch 7 on
EDH Fail
Sets the fail condition to occur when multiple EDH errors are detected. An
error condition will be set if 3 fields containing EDH errors are detected
within 32 fields and cleared once 32 consecutive error free fields are
present.
Switch 8 on
HOLD
Sets the router to change sources when the current source fails, providing
the other source is good, when in AUTO mode.
off
FLIP/FLOP
Sets the router to always select input 1if source 1 is good, when in AUTO
mode.
