www.vistacnc.com
- 7 -
www.vistacnc.com
- 7 -
iMach
III
P2-S Pendant Manual v. 4.0.0
2.4 CONTINUOUS RATE mode
Press and hold EN side button , to change to C% mode. In C% mode, turning MPG changes the
speed used in CONTINUOUS
mode. The rate displays in Slow Jog Rate DRO (Digital Read Outs) on
Mach3 Screen.
2.5
FEED RATE mode
In F% mode, turning MPG changes feed rate overridden (FRO) rate from 1% to 250 %. FRO rate can
be changed when axes are moving
.
□
Feed Rate Override percentage.
□
Feed Rate Override, Unit/Min.
2.6 SPINDLE SPEED mode
Press and hold the EN side button , to change to S% mode. In S% mode, turning MPG changes
spindle speed overridden rate from 1% to 250 %. Spindle speed can be changed when the spindle is
running
.
